Product Overview
Unilift AP12 is a submersible pump designed for pumping clean, non-aggressive water and slightly dirty (grey) wastewater. The pump can be used as a portable unit.
Part No: #96010664.
Unilift AP12.40.08.1
Submersible drainage pump type
Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase totally enclosed motor
in insulation class F with thermal overload protection. The pump is fitted with a suction strainer.
The impeller is a Semi-open impeller for 7/16 in free passage suitable for pumping groundwater, surface water, rain water and
similar liquids.
The pump has a double shaft seal and an intermediate oil chamber pre-filled with
non-toxic special oil.
The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life
ball bearings. The pump is ready for use as it is fitted with carrying handle and is supplied with a 24.9 ft mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.
Documentation:
Brochure
Data Booklet
AP Installation
| Liquid: | |
| Pumped liquid: | Water |
| Liquid temperature range: | 32 .. 131 °F |
| Liquid temp: | 68 °F |
| Density: | 62.4 lb/ft³ |
| Kinematic viscosity: | 1 cSt |
| Technical: | |
| Actual calculated flow: | 27.9 US gpm |
| Resulting head of the pump: | 42.4 ft |
| Type of impeller: | Semi-open |
| Maximum particle size: | 7/16 in |
| Approvals on nameplate: | CSA |
| Materials: | |
| Pump housing: | Stainless steel |
| Pump housing: | DIN W.-Nr. 1.4301 |
| Pump housing: | AISI 304 |
| Impeller: | Stainless steel |
| Impeller: | DIN W.-Nr. 1.4301 |
| Impeller: | AISI 304 |
| Installation: | |
| Pump outlet: | Rp 1 1/2 |
| Maximum installation depth: | 25 ft |
| Electrical data: | |
| Type of motor: | PSC |
| Power input - P1: | 1.58 W |
| C run: | 16 µF |
| Power input - P1: | 1.2 kW |
| Main frequency: | 60 Hz |
| Rated voltage: | 1 x 220-230 V |
| Rated current: | 5.8 A |
| Starting current: | 24 A |
| Cos phi - power factor: | 0,99 |
| Rated speed: | 3400 rpm |
| Capacitor size - run: | 16 µF/400 V |
| Enclosure class (IEC 34-5): | IP68 |
| Insulation class (IEC 85): | F |
| Length of cable: | 24.9 ft |
| Type of cable plug: | NONE |
| Others: | |
| Gross weight: | 30.6 lb |
| Shipping volume: | 1.17 ft³ |