NSF 55 includes both Class "A" systems, which require a minimum UV dose of 40mj, for use with waters that are assumed to be contaminated, and Class "B" systems, which require a dose of 16mj. Class "B" systems are only intended to provide supplemental disinfection of non-pathogenic nuisance organisms on water supplies that are otherwise considered potable.
UVMAX H PLUS RS (40 GPM 120V/230V) is a Class “A” UV system.
- Even with the high flow capabilities, their footprint is half the size of their predecessors, making installation quicker and easier.
- Being built from our state-of-the-art Pro Series platform allows the UVMax G, H & J to share in many of the same product advances such as its incredibly intuitive interface, plug-and-play connections and a sensor confirmation button.
- A revolutionary lamp design provides a constant UV dose in a range of water temperatures, from hot recirculation lines to ice-cold water, giving you the flexibility to install in a variety of site conditions.
Product: #650652, #650655
(85% UVT eol)
|Controller||33 x 16.5 cm
(13" x 6.5")
|Inlet/Outlet Port Size||Combo 1¼" NPT, 1" MNPT|
|Max. current||1.6 Amp|
|Power Consumption||160 W|
|Lamp Power||140 W|
|Operating Parameters||Maximum Operating Pressure||100 PSI
|Minimum Operating Pressure||10 PSI
|Ambient Temperature||0-40 °C
|Maximum humidity||100 %|
|Maximum hardness||120 ppm
(7 grains per gallon)
|Maximum iron||0.3 ppm|
|Minimum UVT||75 %|
|Reactor Chamber Material||316L S.S.|
|UV Lamp Life||2 years|
|Colour-coded plug and play connections||Yes|
|UV intensity monitor with diagnostic test||Yes|
|Sensor with diagnostic test||Optional|
|Controls||Audible alarm mute button||Yes|
|New lamp button||Yes|
|Lamp age indicator||Yes|
|Lamp operation indicator||Yes|
|Ballast operation indicator||Yes|
|Solenoid operation indicator||Yes|
|Fan operation indicator||Yes|
|Sensor reading indicator||Yes|