Product Overview
NOTE: $25 Fixed Shipping Rate not available in Hawaii or Alaska
Features:
- Equipped to inactivate chlorine-resistant parasites such as Cryptosporidium and Giardia, harmful bacteria like E.Coli and viruses not visible to the naked eye.
- The UVMAX systems use a revolutionary lamp with twice the output of current high-output lamps, giving you compact single-lamp systems that are half the size of their predecessors.
- Our revolutionary amalgam lamps last up to two years, reducing maintenance requirements.
- The CoolTouch significantly reduces water temperature and does not waste any water.
- Easy Quarter-Twist Assembly: A quarter-twist to the positive stop and you’re done. No tools and no risk of over tightening.
- The power supply has an intuitive interface – showing you the performance of the system.
- All connections are color coded – simply plug and play!
- The optional COMMcenter displays dose in real-time and can monitor up to 9 UV systems - that’s up to 270 GPM!
- The solenoid stops water flow in the event that water treatment is compromised
Professional grade equipment that redefines reliability with rock-solid performance under all environmental conditions. The new UVMax Pro Series offers a unique combination of brains and brawn, with twice the raw power of other UV systems and the intelligence to provide a real-time measure of the delivered dose. Most importantly, we’ve drastically improved the most critical measure of a UV system’s performance - it’s ability to deliver a constant, reliable dose.
Product: #650647, #650650
NSF 55 includes both Class "A" systems, which require a minimum UV dose of 40mj, for use with waters that are assumed to be contaminated, and Class "B" systems, which require a dose of 16mj. Class "B" systems are only intended to provide supplemental disinfection of non-pathogenic nuisance organisms on water supplies that are otherwise considered potable.
UVMAX PRO 10 RS (10 GPM 120V/230V) is a Class “A” UV system.
Documentation:
Brochure
Manual
| Flow Rate NSF/EPA 40 mJ/cm² |
37.9 lpm (10.0 gpm) (2.3 m³/Hr) |
|
|---|---|---|
| Dimensions | Length | 54.0 cm (21.3 ") |
| Diameter | 10.0 cm (3.9 ") |
|
| Controller | 33 x 16.5 cm (13" x 6.5") |
|
| Inlet/Outlet Port Size | Combo 1¼" NPT, 1" FNPT | |
| Electrical | Volts | 120-240V 50-60Hz |
| Max. current | 1.2 Amp | |
| Power Consumption | 120 W | |
| Lamp Power | 100 W | |
| Operating Parameters | Maximum Operating Pressure | 100 PSI (689 kPa) |
| Minimum Operating Pressure | 10 PSI (69 kPa) |
|
| Ambient Temperature | 0-40 °C (32-104 °F) |
|
| Maximum humidity | 100 % | |
| Maximum hardness | 120 ppm (7 grains per gallon) |
|
| Maximum iron | 0.3 ppm | |
| Minimum UVT | 75 % | |
| Colour-coded plug and play connections | Yes | |
| UV intensity monitor with diagnostic test | Yes | |
| CoolTouch fan | Yes | |
| Dynamic flow restrictor | Yes | |
| Communications ports (two, RJ45) | Yes | |
| COMMcenter control package | Optional | |
| Solenoid Valve | Optional | |
| Rated service life of lamp | Yes | |
| Controls | Audible alarm mute button | Yes |
| New lamp button | Yes | |
| Lamp age indicator | Yes | |
| Lamp operation indicator | Yes | |
| Ballast operation indicator | Yes | |
| Solenoid operation indicator | Yes | |
| Fan operation indicator | Yes | |
| Sensor reading indicator | Yes | |
| Installation | Vertical | |
