Grundfos SBA 1HP A/AW Submersible Pump

The new Grundfos SBA is a complete all-in-one unit. It is built on the proven SB platform, but comes with an integrated control unit – eliminating the need for an external pump controller.

The SBA is literally a plug- and pump solution. Once installed and connected to the piping, all you need to do is switch on the pump.

Model SBA-3-45 AW includes Floating Filter. Model SBA-3-45 A does not. Both Pumps include Float Switch.

Features and benefits:

• 115V
• 1 HP
• Easy selection
• Flexible installation
• No controller inside the house
• All SBA pumps are available in two main variants
• With integrated suction strainer
• Or with side inlet/flexible suction hose with floating suction strainer
• Float Switch

The float switch offers automatic operation and dry run protection, stop at low water level, ensuring that surface fragments do not enter the strainer.

The SB and SBA pump is a submersible booster pump for the pumping of clean water. It is especially suitable for rainwater applications.

Although not required, a small, 2 - 4 gallon pressure tank is recommended to prevent cycling when a leak is present in the piping, extending the life of the pump. It also prevents the pump from starting/stopping when very little water is used, if a tap is only opened for a couple of seconds, for example.

More features and benefits:

• Noiseless operation
• High reliability
• Integrated protection
• Floating suction strainer
• The model with floating suction strainer always draws the water from just below the water surface where the water is clean and free from solid particles
• Simplicity
• All-in-one unit
• Easy installation
• No external control unit
• Integrated dry running protection
• Automatic restart after dry-running
• Lifting eye
• Outlet adapter included: Plastic adapter screws into the top outlet adapter & provides connections to 1" NPT, garden hose thread, and 1" hose barbs.

Documentation:
User Instructions
Data Sheet
Brochure